Lexmark 20K1100 User's Reference - Page 154

Using printer menus Menu Item Paper Size Paper Source Purpose Values To identify the default size for each media source. For trays with automatic size sensing, only the value detected by the hardware is displayed. 1 Select a media source. Note: Tray 2 Size accommodates A4*, Letter*, and Executive sizes only. Tray 1 Size Tray 2 Size 2 Select a value. Letter* (* Denotes country/region-specific factory default values) Note: Size sensing must be turned off for Statement and Folio values to appear. With Auto Size Sensing set On, Tray 1 can only detect the following sizes: Letter, Legal, Executive, A4, B5 Envelope, 10 Envelope, and DL Envelope. Legal Executive Folio Statement A4* A5 Tray 2 Size values are A4, Letter, and Executive. JIS B5 Universal Select Universal when you load media that does not match any of the other available sizes. The printer automatically formats the page for the maximum possible size. You can then set the actual page size from your application software. 10 Envelope (US) 9 Envelope B5 Envelope Other Envelope Select Other Envelope when you load an envelope that does not match any of the other available sizes. The printer automatically formats the envelope for the maximum possible size. You can then set the actual size from your application software. DL Envelope (non US) C5 Envelope To identify the default source. Note: Only installed sources are shown on the operator panel. Tray 1* Tray 2 If you loaded the same size and type of paper in two paper sources (and the Paper Size and Paper Type menu items are correctly set), the trays are automatically linked. When one paper source is empty, paper automatically feeds from the next linked source. Paper Menu 154