Lexmark 20K1100 User's Reference - Page 183

Understanding printer messages Message 54 Network Software Error 54 Std Network Software Error 54 Std Par ENA Connection Lost 54 Par ENA Connection Lost 55 Unsupported Option in Slot 55 Unsupported Flash in Slot 56 Serial Port Disabled 56 Parallel Port Disabled 56 Std Parallel Port Disabled 56 USB Port Disabled 56 Standard USB Port Disabled 57 Configuration Change What this message means What you can do The printer cannot establish communications with an installed network port. • Press Go to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface by way of the parallel port. • Press Menu to open the Job Menu and reset the printer. The printer has lost the connection to an external print server (also called an external network adapter or ENA). • Make sure the cable connecting the ENA and the printer is securely attached. Turn the printer off and then on to reset the printer. • Press Go to clear the message. The printer erases any reference to the ENA and then resets. An unsupported option card is installed in one of the ports or an unsupported flash DIMM is installed in a memory slot. Turn off and unplug the printer. Remove the unsupported option. Plug in the printer and turn it on. See Removing optional cards for help. Data has been sent to the printer through a serial port, but the serial port is disabled. • Press Go to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. See also: Serial Buffer Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. See also: Parallel Buffer Data has been sent to the printer through a USB port, but the USB port is disabled. • Press Go to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. See also: USB Buffer The printer cannot restore confidential or held jobs on the hard disk because the print configuration has changed. Note: The messages 57 Configuration Change and Held Jobs May Not Be Restored alternate on the display. Press Go to clear the message. Understanding printer messages 183