Lexmark C530DN Menus and Messages Guide - Page 29

Menu item Description Settings Symbol Set Specifies the symbol set for each font name Notes: 10U PC-8 (US) 12U PC-850 (non-US) PCL Emulation Settings Œ Point Size • The default setting is based on the country/region default setting. • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown. Changes the point size for scalable typographic fonts 1.00-1008.00 Notes: • 12 is the default setting. • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch. • Point sizes can be increased or decreased by 0.25 point increments. PCL Emulation Settings Œ Pitch Specifies the font pitch for scalable monospaced fonts Notes: 0.08-100 • 10 is the default setting. • Pitch refers to the number of fixed-space characters per inch (cpi). • Pitch can be increased or decreased by 0.01 cpi increments. • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed. PCL Emulation Settings Œ Orientation Specifies the orientation of text and graphics on the page Portrait Notes: Landscape • Portrait is the default setting. • Portrait prints text and graphics parallel to the short edge of the page. • Landscape prints text and graphics parallel to the long edge of the page. PCL Emulation Settings Œ Lines per Page Specifies the number of lines that print on each page 1-255 Notes: • 60 is the US default setting. 64 is the non-US default setting. 60 (US) 64 (non-US) • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page. *Settings appear only if the feature is supported. 29