Lexmark C530DN Menus and Messages Guide - Page 49

• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed. • Cancel the current print job. 37 Insufficient memory for Flash Memory Defragment operation • Press until Continue appears, then press to stop the defragment operation and continue printing. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. 35 Insufficient memory to support Resource Save feature • Press until Continue appears, then press to disable Resource Save and continue printing. • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save. • Install additional memory. 37 Insufficient memory to collate job • Press until Continue appears, then press the rest of the print job. • Cancel the current print job. to print the portion of the job already stored and begin collating 37 Insufficient memory, some held jobs were deleted Try one of the following methods: • Press until Continue or Cancel job appears, and then press • Install additional printer memory. to clear the message. 37 Insufficient memory, some held jobs will not be restored Try one of the following methods: • Press until Continue appears, and then press • Install additional printer memory or delete print jobs. to clear the message. 38 Memory Full • Press until Continue appears, then press • Cancel the current print job. • Install additional printer memory. to clear the message. 39 Page is too complex to print • Press until Continue appears, then press • Cancel the current print job. • Install additional printer memory. to clear the message and continue printing. 50 PPDS font error • Press until Continue appears, then press • Cancel the current print job. to clear the message and continue printing. 49