Lexmark C530DN Menus and Messages Guide - Page 51

56 Serial port disabled • Press until Continue appears, and then press to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item is not set to Disabled. 56 Standard USB port disabled • Press until Continue appears, and then press to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item is not set to Disabled. 58 Too many flash options installed 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer power back on. 61 Remove defective hard disk • Press until Continue appears, and then press to clear the message and continue printing. • Install a different hard disk before performing any operations that require a hard disk. 62 Disk full • Press until Continue appears, and then press to clear the message and continue processing. • Delete fonts, macros, and other data stored on the hard disk. • Install a larger hard disk. 63 Unformatted disk • Press until Continue appears, and then press • Format the disk. to clear the message and continue printing. If the error message remains, the hard disk may be defective and require replacing. 80 Fuser life warning • Press until Continue appears, and then press • Format the disk. to clear the message and continue printing. 80 Replace fuser Replace the fuser using the instruction sheet that shipped with the replacement part. 82 Waste toner box nearly full • Press until Continue appears, and then press • Order a replacement waste toner box immediately. to clear the message and continue printing. 82 Replace waste toner box Replace the waste toner box using the instruction sheet that shipped with the replacement part. 51