Lexmark C530DN Menus and Messages Guide - Page 40

Menu item Job Buffering Serial Protocol Robust XON Baud Data Bits Parity Description Settings Temporarily stores jobs on the printer hard disk before printing Off Notes: • Off is the default setting. On Auto • The On setting buffers jobs on the printer hard disk. • The Auto setting buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting automatically resets the printer. Selects the hardware and software handshaking settings for the DTR serial port DTR/DSR Notes: XON/XOFF • DTR is the default setting. • DTR/DSR is a hardware handshaking setting. XON/XOFF/DTR XON/XOFF/DTR/DSR • XON/XOFF is a software handshaking setting. • XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and software handshaking settings. Determines whether or not the printer communicates availability Off to the computer On Notes: • Off is the default setting. • This menu item only applies to the serial port if Serial Protocol is set to XON/XOFF. Specifies the rate at which data can be received through the 1200 serial port 2400 Notes: 4800 • 9600 is the default setting. 9600 • 138200, 172800, 230400, and 345600 baud rates are only 19200 displayed in the Standard Serial menu. These settings do 38400 not appear in the Serial Option 1, Serial Option 2, or Serial 57600 Option 3 menus. 115200 138200 172800 230400 345600 Specifies the number of data bits that are sent in each 7 transmission frame 8 Note: 8 is the default setting. Sets the parity for serial input and output data frames Note: None is the default setting. Even Odd None Ignore 40