Lexmark C530DN Menus and Messages Guide - Page 37
Standard Parallel and Parallel <x> menu
UPC - 734646030908
View all Lexmark C530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Standard Parallel and Parallel menu Menu item PCL SmartSwitch PS SmartSwitch NPA Mode Parallel Buffer Description Settings Sets the printer to automatically switch to PCL emulation when On a print job received through a USB port requires it, regardless of Off the default printer language Notes: • On is the default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. Sets the printer to automatically switch to PS emulation when a On print job received through a USB port requires it, regardless of Off the default printer language Notes: • On is the default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off. Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: On Off Auto • Auto is the default setting. • Changing this setting automatically resets the printer. Sets the size of the parallel input buffer Disabled Notes: Auto • Auto is the default setting. 3K to maximum size allowed • The Disabled setting turns off job buffering. Any jobs already buffered on the disk are printed before normal processing is resumed. • The parallel buffer size setting can be changed in 1K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Parallel Buffer, disable or reduce the size of the USB, serial, and network buffers. • Changing this setting automatically resets the printer. 37