Lexmark MX310 Card Stock & Label Guide - Page 62

Lexmark C935

Get Lexmark MX310 PDF manuals and user guides View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Printer specifications 62 Media specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2 Thickness: 0.13-0.20 mm (0.005-0.008 in.) Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die‑cut, the edge of the label or the perforations, or between the die‑cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • From the printer control panel, set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark C935 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Media specifications
Labels
Width:
210–216 mm (8.3–8.5 in.)
Length:
279–356 mm (11–11.7 in.)
Weight:
120–128 g/m
2
Thickness:
0.13–0.20 mm (0.005–0.008 in.)
Smoothness:
100–400 Sheffield*
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality
degradation.
Card stock
Width:
210–216 mm (8.3–8.5 in.)
Length:
279–356 mm (11–11.7 in.)
Weight:
Up to 216 g/m
2
Card stock and label guidelines
When printing on labels:
•
From the printer control panel, set Paper Type to Labels in the Paper Menu.
•
Do
not
use label sheets with a slick backing material.
•
Do
not
print within 1 mm (0.04 in.) of the die
‑
cut, the edge of the label or the perforations, or between the die
‑
cuts.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do
not
use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
•
From the printer control panel, set Paper Type to Card Stock.
•
Do
not
use creased card stock. It may cause paper jams.
•
We recommend the use of grain long card stock.
Lexmark C935
Limit label printing to occasional use of A4
‑
or letter
‑
size paper office labels designed for laser printers. We do
not
recommend using vinyl or polyester labels.
Lexmark C935 supports card stock up to 220 g/m
2
.
Printer specifications
62