Lexmark MX310 Card Stock & Label Guide - Page 73

Printer specifications 73 Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 14. Lexmark E250, E350, and E450n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Cover - Tray 2 - - - Manual Feed 163 g/m2 163 g/m2 - Card stock should be grain short and set to exit the rear door. For paper and transparency specifications, refer to the printer publications CD. Labels Paper 90 g/m2 90 g/m2 90 g/m2 Vinyl - - - Media specifications Labels Width: Length: Weight: Thickness: Smoothness: 210-216 mm (8.3-8.5 in.) 279-297 mm (11-11.7 in.) Up to 90 g/m2 (24 lb) Up to 0.25 mm (0.01 in.) 100-400* Sheffield