Lexmark MX310 Card Stock & Label Guide - Page 72
Lexmark E238, E240, E240n, E340, and E342n
View all Lexmark MX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Printer specifications 72 Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 14. Lexmark E238, E240, E240n, E340, and E342n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports stocks up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Cover - Tray 2 - - - Manual Feed 163 g/m2 163 g/m2 - Note: The E238 printer does not support a second drawer option. For paper and transparency specifications, refer to the printer publications CD. Labels Paper 90 g/m2 90 g/m2 163 g/m2 Vinyl - - - Media specifications Labels Width: 89-216 mm (3.5-8.5 in.) Length: 210-356 mm (8.27-14 in.) Weight: Up to 163 g/m2(43 lb) Thickness: Up to 0.25 mm (0.01 in.) Smoothness: 100-400* Sheffield *150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.