Lexmark X864 SCS/TNe Emulation User's Guide - Page 41
Menus > Network/Ports > Standard Network > Std, Standard Network > Std Network Setup >
View all Lexmark X864 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2 Set the Job Timeout. This timeout is used by all print servers. Select Menus > Network/Ports. Select the print server to be used for SCS printing, for example Standard Network. Select Standard Network > Std Network Setup > Network Card > Job Timeout. Scroll down to 0. Touch Submit to save. Option Value Network Job 0 Timeout Description This is the recommended setting and corresponds to "disabled". Other settings may cause communication problems. A setting of "0" allows the host or SNA server timeout values to control when print jobs from another protocol, interface, server, or host can be started. 3 Set the TCP/IP option values shown in the table below. Select Menus > Network/Ports > Standard Network > Std Network Setup > TCP/IP. You will need to contact your network administrator for several of the values. Mainframe Installation Setup: Task 3 -Configuring a Print Server 43