Lexmark X864 SCS/TNe Emulation User's Guide - Page 58

2 Set the Job Timeout. This timeout is used by all print servers. Select Menus > Network/Ports. Select the print server to be used for SCS printing, for example Standard Network. Select Standard Network > Std Network Setup > Network Card > Job Timeout. Scroll down to 0. Touch Submit to save. Option Network Job Timeout Value Description "0" This is the recommended setting and corresponds to "disabled". Other settings may cause communication problems. A setting of "0" allows the host SNA server, or SCS/TNe emulation timeout values to control when print jobs from another protocol, interface, server, or host can be started. 3 Set the TCP/IP option values shown in the table below. Select Menus > Network/Ports > Standard Network > Std Network Setup > TCP/IP. You will need to contact your network administrator for several of the values. You will need to contact your network administrator for several of the values. AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server 60