Lexmark X864 SCS/TNe Emulation User's Guide - Page 90

Connect Status This Network Setup option displays the connection status with the host. The option cannot be changed by the user. Normally only the primary status is shown. If problems occur, a last response message is appended to the primary status message. The complete status message text may not be displayed. Refer to the tables below. Connect Status: Primary status messages Connected to server. LU name: [LU NAME] Negotiating with TN server Not Configured Print Inactive * Comments A Telnet connection is established and the SCS/TNe Emulation is ready to receive print jobs. The LU name displayed is the name negotiated with the Telnet server. Refer to the LU Name and Device Type options. The SCS/TNe Emulation has succesfully established a TCP/IP connection and is negotiating the Telnet device configuration. The IP Address, Hostname, or LU Name in the TN3270E SERVER INFO menu has not been configured. One of the following conditions exists and is preventing a session from being estalished. 1 Print Active = No. Solution: Set to Yes. (Path: Menus > Option Card Menu > SCS/TNe MENU > TN3270E SETUP > NETWORK SETUP). 2 NPA Mode = Off. Solution: Set to Auto. (Path: Menus > Network/Ports > print server to be used for SCS printing > NPA Mode). 3 Cable is not plugged into print server. Plug in cable. 4 Network is down. Check network. Operations - TN3270E SETUP: NETWORK SETUP > Connect Status 92