Lexmark X864 SCS/TNe Emulation User's Guide - Page 46

The table below shows the factory default settings and recommended settings. The option setting values found in the table are described in section "NETWORK SETUP> SERVER INFO Menu: Options Overview" on page 95. SERVER INFO Option Name / IP Address IP Address Hostname TN Server Port Default Value Recommended Value Comments Use IP Address Check with your system administrator whether you need to specify the specific IP address or the name of the host which the printer will contact to receive SCS jobs. 0.0.0.0 The TNe Server's IP In order to make a connection to the mainframe host, an IP address address must be entered or a hostname defined. If you selected Use IP Address in the Name / IP Address option, enter the appropriate IP Address here. (This option is not used if you selected Use Hostname). [undefined] A hostname to look In order to make a connection to the mainframe host, an IP up on a DNS server: address must be entered or a hostname defined. (up to 16 characters) If you selected Use Hostname in the Name / IP Address option, enter the appropriate hostname here. (This option is not used if you selected Use IP Address.) 23 23 Check with your system administrator to determine whether another TCP port number is defined for the Telnet service. Mainframe Installation Setup: Task 5 - Configuring the SCS/TNe Emulation 48