Marantz DR4050 DR4050 USER'S MANUAL - Page 17
English, High speed recording from internal CD player
View all Marantz DR4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English RECORDING High speed recording from internal CD player STOP CD RECORDER DR4050 REC TYPE REC FINALIZE ERASE SOURCE CD-R EASY JOG - + STORE CANCEL PLAY/PAUSE STOP /MENU /DELETE PUSH ENTER PROG SHUFFLE DISPLAY SCROLL REPEAT DJ MODE During high speed recording the sound is not audible. Preparing for high speed recording 1 Make sure that the recording disc is absolutely free of scratches and dust particles. 2 Press REC TYPE to choose the type of recording: once: to select 'RECORD FAST' if you wish to make a fast recording of a disc or programmed tracks; three times: to select 'MAKE CD' if you wish to make a fast recording of a disc or programmed tracks and to automatically finalize the recording. § The display first shows the selection. The fRECORDg label starts blinking. After 3 seconds the display shows the remaining CDR(W) recording time on the left and total time of source on the right. (every 2 seconds PRESS RECORD is displayed.) The left selection indicator is lit. REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I ANALOG RW RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I ANALOG RW RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I ANALOG RW RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK • If DOES NOT FIT appears on the display, there is not enough recording space left on the CDR(W) disc. You can press RECORD: only complete tracks that still fit on the CDR(W) will recorded. or You can press PROG to select one or more tracks for recording (see programming): - rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control) or - directly select the track number via the 10-keypad on the remote control then press the ENTER key to confirm your selection and go to the next step. Start high speed recording 1 Press RECORD to start recording. § WAIT lights up. The display shows the total remaining time for the selected recording. High speed recording starts. fRECORDg lights continuously. • To check the track number and track time, press DISPLAY. This can be done during recording. • Recording will stop automatically. Note: Copy prohibited tracks will be copied analog. ANALOG REC is displayed. 2 To stop recording manually, press STOP. § UPDATE lights up, fRECORDg goes out and recording stops. (Minimal track length must be 4 seconds otherwise silence will be added to the track.) • If STOP was pressed within 3 seconds after RECORD, no recording will take place. After recording, the display shows UPDATE for several seconds. The Total time indications can differ slightly. However, no music information is lost. Note: In this Recording mode, the Pause function is not operative. Important: If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. See finalizing discs. Finalized CDRW discs play only on CDRW compatible CD players. 17