Marantz DR4050 DR4050 USER'S MANUAL - Page 18

RECORDING English Listen mode recording from internal CD player STOP CD RECORDER DR4050 REC TYPE REC FINALIZE ERASE SOURCE CD-R EASY JOG - + STORE CANCEL PLAY/PAUSE STOP /MENU /DELETE PUSH ENTER PROG SHUFFLE DISPLAY SCROLL REPEAT DJ MODE During Listen mode recording you listen to the recording while you are making it. Preparing for Listen mode recording 1 Make sure that the recording disc is absolutely free of scratches and dust particles. 2 For recording, press REC TYPE twice: § The display first shows the selection. The fRECORDg label starts blinking. After 3 seconds the display shows the remaining CDR(W) recording time on the left and total time of source on the right. (every 2 seconds PRESS RECORD is displayed) The left selection indicator is lit. REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I ANALOG RW RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I RW ANALOG RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK REM REC TIME TRACK TOTAL REM TRACK TIME STEP SYNC MANUAL DIGITAL I CD OPTICAL I RW ANALOG RECORD CHANGER PROG CD SHUFFLE ALL RW REPEAT SCAN TRACK • If DOES NOT FIT appears on the display, there is not enough recording space left on the CDR(W) disc. You can press RECORD: only complete tracks that still fit on the CDR(W) will recorded. or You can press PROG to select one or more tracks for recording (see programming): - rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control) 18 or - directly select the track number via the 10-keypad on the remote control then press the ENTER key to confirm your selection and go to the next step. 3 Play the source first to set the optimal recording level on the CD recorder. 4 Rotate the EASY JOG/ENTER key until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages. § Display shows _XX DB (Decibel, e.g. -3DB). 5 Stop the source. Start Listen mode recording 1 To start recording, press RECORD. § WAIT lights up. fRECORDg lights continuously and the selected track or program is copied at normal speed. The track number and the recording time left will appear. • To check the track time, press DISPLAY. This can be done during recording. • Recording will stop automatically. Note: Copy prohibited tracks will be copied analog. ANALOG REC is displayed. 2 To stop recording, press STOP. § UPDATE lights up, fRECORDg goes out and recording stops. (Minimal track length must be 4 seconds otherwise silence will be added to the track.) • If STOP was pressed within 3 seconds after RECORD, no recording will take place. After recording, the display shows UPDATE for several seconds. The Total time indications can differ slightly. However, no music information is lost. Note: In this Recording mode, the Pause function is not operative. Important: If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. See finalizing discs. Finalized CDRW discs play only on CDRW compatible CD players.