Maytag MEDZ600TB Use and Care Guide - Page 27

Timed Dry Cycles Preset Settings Timed Dry Cycles Load Type Temperature TIMED DRY Heavyweight, bedspreads, work clothes bulky items, RAPID DRY Small loads, sturdy fabric FRESHEN UP Helps to smooth out wrinkles High High Regular Default Time (Minutes) 40 23 20 Temperature [er'nl)erature settings are used witln the Timed Dry Cycles. Press TEMPERATURE until the desired temperature setting illuminates. ]emperature settings cannot be used with the Sensor Dry Cycles. REGU AR M_DIUM LOw EX RA LOW AIR FLU F Q TEMPERATURE ,_ srs _,_0 Air Fluff Use the Air Fluff temperature setting for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This chart shows examples of items that can be dried using Air Fluff. Type of Load Foam rubber - pillows, padded bras, stuffed toys Plastic - Shower curtains, tablecloths Rubber-backed rugs Olefin, polypropylene, sheer nylon Time* (Minutes) 20 - 30 20 - 30 40 - 50 10 - 20 *Reset time to complete drying, if needed. When using Air Fluff • Check that coverings are securely stitched. • Shake and fluff pillows by hand periodically during the cycle. • Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Fluff is not available with Sensor dry cycles. WRINKLE PREVENT WRINKI.E PREVENT helps smooth out wrinkles that form when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer periodically tumbling the load for 90 minutes. starts and stops, Q WPRREI NVEKNL TE • Press WRINKI.E PREVENT to get up to 90 minutes of heat-free, periodic tumbling at the end of a cycle. • Stop WRINKLE PREVENT at any time by pressing WRINKLE PREVENT or opening the dryer door. • WR[NK[.E PREVENT is preset to OFF. The Sensor [Dry cycles will retain the WRINKLE PREVENT setting. For example, if you select WRINKLE PREVENT in the Normal cycle, WR[NK[.E PREVENT will be on the next time you select the Normal cycle. NOTE: WRINKI.E PREVENT must be selected with a cycle in order to work. [f you do not select WR[NK[E PREVEN]} the dryer stops after cool down. Cycle Signal [he Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. Press CYCLE SIGNAL to turn the signal off. IH OLD3 SECONDCSTYOC L E S I G N A L OCK/UNLOCKCONTROLS NOTE: When the WRINKLE PREVENT feature is selected and the Cycle Signal is on, an audible sound will emit every 5 minutes until the clothes are removed, or the WRINK[E PREVENT feature ends. You can change Sensor Dry Cycles, Timed [Dry Cycles, Options, and Modifiers anytime before pressing Start. • Three short tones sound if an unavailable combination is selected. ]he last selection will not be accepted. Changing Cycles after pressing Start 1. Press PAUSE/CANCEl. twice. This ends the current cycle. 2. Select the desired cycle and options. 3. Press and hold START. The dryer starts at the beginning of the new cycle. NOTE: ]f you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off.