Optoma ZW210ST User's Manual - Page 19
Powering off the projector, Warning Indicator, the screen.
View all Optoma ZW210ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using the Projector Powering Off the Projector 1. Press on the control panel or the remote control to turn off the projector. The following message is displayed on the screen. The "Power Off" message disappears if no button is pressed 2. Press again to confirm. The projector goes to standby mode and the POWER/STANDBY LED lights Amber. after 15 seconds. If you wish to turn the projector on, press to restart the projector. 3. To completely turn the projector off, disconnect the power cord from the electrical outlet. Warning Indicator Warning indicators light up and the projector automatically shuts down in the following conditions: YY "Light" LED indicator is lit amber and the "POWER/ STANDBY" indicator flashes red. Contact the YY "TEMP" LED indicator is lit yellow green and the "POWER/ nearest service center if the projector displays these symptoms. See pages STANDBY" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the projector can be switched back on. YY "TEMP" LED indicator flashes yellow green and the 68-69 for more "POWER/STANDBY" indicator flashes red. information. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator lights up again, contact your nearest service center for assistance. 19 English