Optoma ZW210ST User's Manual - Page 39
SETUP | Signal, Automatic, Phase, H. Position
View all Optoma ZW210ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Adjusting the Settings SETUP | Signal "Signal" is only supported in Analog VGA (RGB) signal. Automatic Automatically selects the signal. If you use this function, Phase and the frequency items are grayed out. If Signal is not automatic, Phase and the frequency items are enabled for user to manually set the settings. Signal settings will take effect the next time the projector is powered on. Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer's graphic card. Use this function only if the image appears to flicker vertically. H. Position ►► Press the to move the image left. ►► Press the to move the image right. V. Position ►► Press the ►► Press the to move the image down. to move the image up. 39 English