Panasonic AGHMC150PJ User Manual - Page 20
Power sources, Using the battery, Using the AC adapter, Installation, Removal
View all Panasonic AGHMC150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Power sources Using the battery Installation Insert the battery until it clicks into place. Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 2 Remove the battery while pressing the battery release button. • Support the battery with your hand to ensure that it will not fall. PB Mode lamp Battery release button Using the AC adapter Installation 1 Connect the DC cord to the AC adapter. 2 Plug the AC power supply cord into the power outlet. 3 Insert the DC cord's battery connector until it clicks into place. Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 2 Remove the DC cord's battery connector while pressing the battery release button. 3 Disconnect the AC power supply cord from the power outlet. • Battery cannot be recharged when the DC cord is connected to the AC adapter. • Disconnect the AC power supply cord from the power outlet when the unit is not going to be used. DC cord's battery connector 20 CAUTION: • This apparatus can be operated at a voltage in the range of 110 - 240 V AC. Voltages other than 120 V are not intended for U.S.A. and Canada. Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.