Panasonic AGHMC150PJ User Manual - Page 52
Saving scene files and other settings on SD Memory Cards, Select CARD READ/WRITE on the settings
View all Panasonic AGHMC150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Saving scene files and other settings on SD Memory Cards You can save up to four scene file settings or other settings as files on an SD Memory Card, and you can also load them from the card. • In the case of the scene files, the current settings are automatically saved in the unit, and the saved data is written on an SD Memory Card. When data has been read from an SD Memory Card, the current settings are rewritten at the same time as the data saved inside the unit. • The data in all the scene files, F1 to F6, is rewritten. 4 Push the Operation lever again, select YES when the following screen is displayed, and push the Operation lever. • In the following example, TITLE001 is the filename. (To change the filename, see the description below.) If you have saved a scene file 1 Set the unit's POWER switch to ON. 2 Select CARD READ/WRITE on the settings menu SCENE FILE screen, select WRITE, and push the Operation lever. For all other settings, select USER FILE. • For menu operations (Page 82) • Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see "Description of parts (Remote control)". (Page 18) 5 Press the MENU button to exit the menu mode. To read files 1) Select READ in step 2 and push the Operation lever. 2) Select the file number and push the Operation lever. 3) Select YES on the confirmation screen. READ COMPLETED will be displayed when reading is complete. 3 Tilt the Operation lever in the directions, select the file number (1 - 4), and push the Operation lever. To add titles to files 1) Go through steps 1 - 3. 2) Tilt the Operation lever in the directions to select characters, and tilt in the direction to move to the next character. The following characters may be inputted. (Space), A-Z, 0-9 3) Push the Operation lever when all characters have been inputted. 4) Select YES on the confirmation screen. • If WRITE NG WRITE PROTECT appears, release the protected status of the SD Memory Card. • If WRITE NG CANNOT ACCESS appears, quit all other operations (such as playback) before proceeding. 52