Panasonic AGHMC150PJ User Manual - Page 86
Setup menu list, SCENE FILE screen
View all Panasonic AGHMC150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Setup menu list SCENE FILE screen Item CARD READ/ WRITE LOAD/SAVE/ INIT SYNCRO SCAN DETAIL LEVEL V DETAIL LEVEL DETAIL CORING CHROMA LEVEL CHROMA PHASE COLOR TEMP Ach COLOR TEMP Bch MASTER PED A.IRIS LEVEL Display mode (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) (Camera) Description of settings Reads and writes scene files on the SD Memory Card. READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card after setting values are selected. WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the SD Memory Card. NO: Returns to the last screen. LOAD: Loads the scene file settings which is saved by this camera. SAVE: Saves the changed scene file settings. INITIALIZE: The settings of the scene file selected with the SCENE FILE dial are returned to the factory settings. NO: Returns to the last screen. Adjusts the synchro scan shutter speed used for shooting images on a TV screen, etc. Holding the Operation lever toward the or will cause the values to change at a faster rate. • 60P/60i: 1/60.0...1/249.8 (Factory default setting is 1/48.0) • 30P: 1/30.0...1/48.0...1/249.8 • 24P: 1/24.0...1/48.0...1/249.8 Adjusts the level of the image outline correction (in the horizontal and vertical directions). - 7...0...+ 7 Adjusts the level of outline correction in the vertical direction. - 7...0...+ 7 Adjusts the level of noise reduction of the detail signal. - 7...0...+ 7 Set to - for a clearer image. Noise increases slightly. Set to + to reduce noise. Adjusts the chroma level. - 7...0...+ 7 Makes fine adjustments to the chroma phase. - 7...0...+ 7 Makes fine adjustments to the color temperature (after white balance Ach adjustment). - 7...0...+ 7 Makes fine adjustments to the color temperature (after white balance Bch adjustment). - 7...0...+ 7 Adjusts the master pedestal (black level of the image) as the basis for images. - 100...0...+ 100 Sets the desired AUTO IRIS level. - 10...0...+ 10 indicates the factory setting. 86