Panasonic AGHMC150PJ User Manual - Page 54
Uploading the metadata (META DATA), Selecting the USER CLIP NAME recording method
View all Panasonic AGHMC150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Clip metadata (continued) Uploading the metadata (META DATA) You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations. Loading the metadata • Insert the SD Memory Card on which the metadata is recorded into the unit. (For details on contents of the metadata, see the previous page.) Selecting whether to record the metadata on the SD Memory Card Initializing the metadata inside the unit Displaying the metadata inside the unit 1 Press the mode button and select CAM mode. 2 Press the MENU button. Menu operation (Page 82) 3 Tilt the lever in the directions to select META DATA, and push the Operation lever (or tilt in the direction). 4 Tilt the Operation lever in the directions to select item, and push the Operation lever. · Up to 10 items of metadata on the SD Memory Card can be displayed, starting from the most recent date of production. · If characters other than single-byte alphanumeric characters are used in the metadata file name to be loaded, they are displayed as "∗". RECORD: Select this to set whether to record the metadata to be loaded into the unit simultaneously on the SD Memory Card. Select ON to record the metadata or OFF to cancel the recording, and push the Operation lever. The factory setting for this mode is OFF. USER CLIP NAME: The USER CLIP NAME recording method is selectable. Please refer to the next column below. CLIP COUNT RESET: Reset the counter value to 1. Select whether or not to reset (YES/NO), and push the Operation lever. META DATA PROP: Select this to display the metadata which has been recorded in the unit. META INITIAL SET: Select this to initialize the metadata which has been recorded in the unit. Select YES to initialize the metadata or NO to cancel the initialization, and push the Operation lever. 5 Press the MENU button to release the menu mode. Selecting the USER CLIP NAME recording method Press the MENU button and select META DATA → USER CLIP NAME to select the recording method. Two options are available: TYPE1 and TYPE2. CARD READ: Read metadata set to the SD Memory Card with the camera. Move to LOAD, push the Operation lever, select whether or not to read the metadata (YES/NO), and push the Operation lever again. 54 USER CLIP NAME to be recorded TYPE1 TYPE2 If clip metadata has Uploaded been read in data Uploaded data + COUNT value∗ If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Sequential 5digit number, in order of recording Sequential 5digit number, in order of recording