Panasonic AGHMC150PJ User Manual - Page 25
Using the LCD, Emphasizing outlines, In CAM mode, press EVF DTL button.
View all Panasonic AGHMC150PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the LCD 1 Set the POWER switch to ON. (Page 22) 2 Hold down the OPEN button and open the LCD monitor. • It can open out to 120°. Do not try to open it further as this will damage the camera. Emphasizing outlines Emphasizing the outlines of the images you see in the viewfinder or on the LCD makes it easier to focus. Emphasizing the outlines does not effect the images you shoot. 1 In CAM mode, press EVF DTL button. "EVF DTL ON" appears on the screen for about 2 seconds. Preparation OPEN button 3 Position the LCD monitor where it is easiest to see. • The monitor can be rotated 180° toward the lens and 90° toward you. • Do not apply unnecessary force to the open LCD. This can damage the camera. BARS SHUTTER SPEED SELECT CH1 SELECT CH2 SELECT INPUT 1 INPUT 2 INT(L) INPUT1 INPUT2 INT(R) INPUT2 ON ON OFF OFF MIC POWER +48V AUDIO COUNTER RESET/TC SET ZEBRA OIS LCD EVF DTL WFM EVF DTL button Press EVF DTL button again to return to the original display. "EVF DTL OFF" appears on the screen for about 2 seconds. • Ensure the LCD is fully closed. • Operation status displays during self-portrait recording No display: Cannot record (no card, etc.) : Recording in progress, during transition to the recording pause mode : Recording paused (recording standby) : Warning display 25