Panasonic VDRD310 Dvd Camcorder - English/spanish - Page 43
Adjusting Lcd Monitor/viewfinder, Lcd Set] Or
View all Panasonic VDRD310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time. To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the OFF/ ON switch is set to OFF, the battery is still being recharged.) Adjusting LCD monitor/ viewfinder Adjusting the brightness and color level 1 Press the MENU button, then select [SETUP] # [LCD SET] or [EVF SET] # [YES] and press the joystick. Setup 2 Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment. The bar display moves. ∫ [LCD SET] [BRIGHTNESS]: Brightness of the LCD monitor [COLOR]: Color level of the LCD monitor ∫ [EVF SET] [BRIGHTNESS]: Brightness of the viewfinder ≥ To adjust the brightness of the viewfinder, extend the viewfinder and close the LCD monitor to activate the viewfinder. ≥ When the LCD monitor is rotated by 180° towards the lens, the brightness and color level of the LCD monitor cannot be adjusted. ≥ These settings will not affect the images actually recorded. Adjusting the field of view Adjust the focus by sliding the eyepiece corrector knob. MENU 0h00m00s 0h00m00s 43 LSQT1145