Panasonic WVCU650 WJSX150 User Guide - Page 11

MONITOR DISPLAY CONTROL Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to p. 35. ■ On-screen Display (OSD) Control The procedure described below lets you determine the display parameters, such as camera title, clock and status, on and off on the active monitor screen. Before controlling each item, monitor selection is necessary. (Refer to p. 3 Monitor Selection.) (1) 08/21/2002 12:50:28 PM 3. To exit the mode, press the MON (ESC) button. ● Displaying All the Items 1. Perform Step 1 of Displaying Each Item. 2. Hold down the SHIFT button. The LCD display will become as follows. OSD On/Off 002 All 3. Press the F1 button. (1), (2), (3), and (4) will appear/disappear on/from the active monitor. M1 K1 T01 (2) C01 camera title (4) ALARM10* (3) ■ On-screen Display (OSD) Position Control The procedure described below lets you determine the display positions, such as camera title, clock and status, on the active monitor screen. ● Displaying Each Item 1. Press the MENU button repeatedly until "OSD On/Off" appears on the LCD. OSD On/Off 002 Clock Cam Event Mon 2. Perform desired operations. q Displaying the clock Toggle the F1 button. (1) will appear/disappear on/from the active monitor. w Displaying the camera title Toggle the F2 button. (2) will appear/disappear on/from the active monitor. e Displaying the event Toggle the F3 button. (3) will appear/disappear on/from the active monitor. r Displaying the monitor status* Toggle the F4 button. (4)* will appear/disappear on/from the active monitor. * Monitor number, system controller name, tour number and recorder number Clock 08/21/2002 12:50:59 PM M1 K1 T01 C01 camera title Camera title Monitor status ALARM10* Event ● Moving Each Item 1. Press the MENU button repeatedly until "OSD Position" appears on the LCD. OSD Position 003 Clock Cam Event Mon 11