Panasonic WVCU650 WJSX150 User Guide - Page 18

WJ-HD500 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD500 Series. The following is the procedure of WJ-HD500 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 36. • When a Multiplexer board is installed in the matrix switcher, you can neither connect nor control a WJHD500 Series recorder. You need to remove the board from the matrix switcher. ■ Displaying WJ-HD500 Series SETUP MENU To display WJ-HD500 Series SETUP MENU, follow the procedure below. 1. Confirm that WJ-HD500 Series is correctly and securely connected. 2. Select the desired monitor. (Refer to p. 3 Monitor Selection.) 3. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) Then, the selected monitor number, recorder number, and "/HDnnn" will appear on the LCD. JogDial clockwise: Increments a parameter. JogDial counterclockwise: Decrements a parameter. CAM (SET) button: Executes the selections and dis- plays a submenu. + button: Increments a parameter. - button: Decrements a parameter. MON (ESC) button: Returns to SETUP MENU or the previous menu. 3D joystick upward (D): Moves the cursor up. 3D joystick downward (C): Moves the cursor down. 3D joystick leftward (A): Moves the cursor to the left. 3D joystick rightward (B): Moves the cursor to the right. 7. To end the setting and return to the normal view, press the F2 button while SETUP MENU is displayed. "B" mark will disappear from the LCD. Mon4 Cam-- R4 /HD500 4. Press the MENU button repeatedly until "System Setup" appears on the LCD. System Setup 501 On Off 5. Press the F1 button. WJ-HD500 Series SETUP MENU will appear on the active monitor, and "B" mark will light up beside "On". System Setup 501 5On Off 6. Perform the camera setting while watching the setup menu on the monitor. The following functions and buttons are valid in SETUP MENU. 18