Panasonic WVCU650 WJSX150 User Guide - Page 38
To Control a Recorder and Cameras via the Network
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
● To Control a Recorder and Cameras via the Network The following is the description of the connection between a recorder and this unit to control the recorder and cameras via the network. 1. Set the unit address of the recorder to 5 or larger. (Refer to the recorder's operating instructions.) 2. Set the [Camera control] setting to "PSD" for all cameras in SETUP MENU of the recorder. 3. Connect the unit's CAM OUT 1 to 16 connectors to the recorder's VIDEO IN 1 to 16 connectors with a coaxial cable. 4. Connect the unit's EXT IN connector to the recorder's MULTISCREEN OUT connector with a coaxial cable. 5. Connect the unit's DATA HDR and DATA4 connectors to the recorder's DATA ports with modular cables. 6. Select the recorder's new unit address, which is set in Step 1, in 600 RECORDER of SETUP MENU or the Recorder window of WJ-SX150A Administrator Console. (Refer to this unit's operating instructions.) System controller (Terminal Mode) Monitor EXT IN MONITOR OUT ALARM DATA HDR DATA 4 TERM OFF ON SERIAL DATA 3 DATA 2 DATA 1 RS485(CAMERA) LINE 2 SELECT 4 EXT IN (PLAY IN) CAMERA SW IN 3 1 PS•DATA RS485(CAMERA) EXT OUT (REC OUT) 4 2 MONITOR OUT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 IN OUT 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 CAMERA SIGNAL GND POWER AC IN DATA HDR DATA 4 (PS·Data) Matrix Switcher MONITOR OUT x DATA 3 1 1 SERIAL ALARM 4 2 AUDIO IN AUDIO OUT CASCADE OUT 2 MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL 16 15 14 13 12 11 10 9 8 7 IN OUT 16 15 14 13 12 11 10 9 8 7 VIDEO MODE 2 1 COPY 1 DATA 6 5 RS485(CAMERA) 10/100BASE-T EXT STORAGE 4 3 2 1 6 5 4 3 2 1 SIGNAL GND POWER AC IN Recorder* * Set the recorder's unit address to 5 or larger. ** LAN: Local Area Network HUB/Router LAN** Notes: • Select the PS·Data protocol for the DATA 4 setting. (Refer to this unit's operating instructions.) • If the recorder's unit address, set in Step 1, and the recorder setting, set in Step 6, are different, the recorder will not be operable. • In these connections, you cannot use a PS·Data system controller. • From system controllers connected to the unit, you cannot control the monitor connected to the MONITOR OUT 1 connector of recorder. 38