Panasonic WVCU650 WJSX150 User Guide - Page 20
Manual Recording, Stopping REC ONLY Alarm, Recording, Search Playback, Search Mode, HD500 - manuale
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
• To skip to the previous/next record during the playback, move the JogDial clockwise or counterclockwise. (Refer to the recorder's operating instructions for the description of record.) JogDial clockwise: Skips to the next record. JogDial counterclockwise: Skips to the previous record. • To display the spot picture, press the numeric button corresponding to the desired camera number, then press the CAM (SET) button. Then, the active camera number will appear on the LCD. Mon4 Cam01 R4 /HD500 • To resume the multiscreen display, press the MULTI SCREEN button. • To change the number of multiscreen segments, press the MULTI SCREEN button again during the multiscreen display. 3. To stop the playback, press the STOP button. The monitor display will return to the multiscreen display. ● Manual Recording 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. To start recording, press the REC button. The digital disk recorder will start recording. 3. To stop the recording, hold down the REC button. Note: Refer to WJ-HD500 Series Operating Instructions for details and other recording modes. ● Stopping REC ONLY Alarm Recording You can stop alarm recording activated by "REC ONLY" setting of 430 CAMERA/440 ALARM PORT/450 SERIAL PORT/460 MUX MOTION DET in SETUP MENU or the Alarm Mode window in WJ-SX150A Administrator Console. (Refer to the operating instructions of matrix switcher.) To stop the alarm recording, press the ALL RESET button while holding down the SHIFT button. ● Search Playback You can search playback images using the Record List or Thumbnail Display. Every time you press the SEARCH/T&D SEARCH button, the monitor display will change as follows. Live image → Date-and-time entry form → Record List → Thumbnail Display → Live image... Then, "Search Mode" will appear on the LCD. • Date-and-time Search Playback The recorded images can be searched for through the date and time. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the SEARCH/T&D SEARCH button. The date-and- time entry form will appear on the center of the monitor. Search Mode /HD500 Edit Group Alm SEARCH YYYY/MM/DD HH:MM 2002/05/07 19:32 Note: The factory default setting is the current date and time. 3. Press the numeric buttons or +/- button to enter the desired date and time. The cursor can be adjusted by moving the 3D joystick rightward or leftward. 4. Press the PLAY/PAUSE button. Record List will be displayed and the cursor will move to the closest date and time. Note: To cancel the entry form, press the MON (ESC) or EXIT button. 20