Panasonic WVCU650 WJSX150 User Guide - Page 17
REC ALM, REC
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
● Still Playback Spot Picture The playback spot picture can be changed into the still picture. Note: To use this function, you need to connect a WJ-HD100 Series recorder or time-lapse VCR to the matrix switcher. 1. Enter the recorder mode. (Refer to Step 1 to 3 of p. 16 Multiscreen Segment Switching.) 2. Press the PLAY/PAUSE button. The system will enter the playback mode. 3. Select a camera channel by pressing a numeric button and then pressing the CAM (SET) button. The selected camera image will be displayed in a spot picture. 4. Press the MENU repeatedly until "Mux Still" appears on the LCD. Mux Still 052 "Input Still CH" 5. Press the F1 button. The selected camera image will change into the still picture. 6. To cancel the still picture, press the F1 button again. Notes: • Still picture is not available while zooming is activated. • Even when still picture is displayed, the playback of the recorder/time-lapse VCR continues. 6. Press the EL-ZOOM button. The area surrounded by the "+" signs will be zoomed up. 7. To move the zoom area, move the 3D joystick. 8. To cancel the zooming, press the EL-ZOOM button. Note: Still picture is not available while zooming is activated. Note: When a WJ-HD100 Series recorder or a Panasonic time-lapse VCR is connected to the matrix switcher, recording status will appear on the monitor in the recorder mode. When the normal recording is activated, "REC" will appear on the monitor. When the alarm recording is activated, "REC ALM" will appear. REC REC ALM ● Electronic Zooming (EL-ZOOM) The playback spot picture can be electrically zoomed. Note: To use this function, you need to connect a WJ-HD100 Series recorder or time-lapse VCR to the matrix switcher. 1. Enter the recorder mode. (Refer to Step 1 to 3 of p. 16 Multiscreen Segment Switching.) 2. Press the PLAY/PAUSE button. The system will enter the playback mode. 3. Select a camera channel by pressing a numeric button and then pressing the CAM (SET) button. The selected camera image will be displayed in a playback spot picture. 4. Press the EL-ZOOM button. "+" signs will appear on the image. 5. To move the "+" signs within the picture, move the 3D joystick. 17