Panasonic WVCU650 WJSX150 User Guide - Page 22
Wj-hd300 Series Control (terminal Mode), Displaying Wj-hd300 Series, Setup Menu - parts
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
WJ-HD300 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD300 Series. The following is the procedure of WJ-HD300 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 36. • When a Multiplexer board is installed in the matrix switcher, you can neither connect nor control a WJ-HD300 Series recorder. You need to remove the board from the matrix switcher. • Some parts of monitor displays, described on this document, may differ from the actual status. ■ Displaying WJ-HD300 Series SETUP MENU To display WJ-HD300 Series SETUP MENU, follow the procedure below. 1. Confirm that WJ-HD300 Series is correctly and securely connected. 2. Select the desired monitor. (Refer to p. 3 Monitor Selection.) 3. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) Then, the selected monitor number, recorder number, and "/HD300" will appear on the LCD. Mon4 Cam-- R4 /HD300 JogDial clockwise: Increments a parameter. JogDial counterclockwise: Decrements a parameter. CAM (SET) button: Executes the selections and dis- plays a submenu. + button: Increments a parameter. - button: Decrements a parameter. MON (ESC) button: Returns to SETUP MENU or the previous menu. 3D joystick upward (D): Moves the cursor up. 3D joystick downward (C): Moves the cursor down. 3D joystick to the left (A): Moves the cursor to the left. 3D joystick to the right (B): Moves the cursor to the right. CLEAR button: Deletes a character when editing a camera title, user ID, or password, etc. 6. To end the setting and return to the normal view, press the F2 button when SETUP MENU is displayed. "B" mark will disappear from the LCD. ■ Controlling Digital Disk Recorder WJ-HD300 Series The following are the operating procedures of WJ-HD300 Series via the system controller. 4. Press the MENU button repeatedly until "System Setup" appears on the LCD. System Setup 301 On Off 5. Press the F1 button. System Setup 301 5On Off WJ-HD300 Series SETUP MENU will appear on the active monitor, and "B" mark will light up beside "On". The following functions and buttons are valid in SETUP MENU. 22 ● Recorder Mode The operations are the same as WJ-HD500 Series. (Refer to p. 19.) ● Multiscreen Segment Switching The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: The multiscreen segment patterns can be switched as follows. (Applicable for WJ-HD316) 4 segments (1 - 4 CH) → 4 segments (5 - 8 CH) → 4 segments (9 - 12 CH) → 4 segments (13 - 16 CH) → 7 segments (1 - 7 CH) → 9 segments (1 - 9 CH) → 9 segments (10 -16 CH) → 10 segments (1 - 10 CH) → 13 segments (1 - 13 CH) → 16 segments (1 - 16 CH)