Panasonic WVCU650 WJSX150 User Guide - Page 40

● Settings of Administrator Console and SETUP MENU(OSD) When WJ-SX150A Administrator Console is Ver. 2.03 or later Select "HD300". When the firmware of this unit is Ver. 2.03 or later. Select "HD300" for "CONTROL" in 600 RECORDER of SETUP MENU(OSD). 600 RECORDER CONTROL ADR EXT IN 610 MASTER --- 620 SLAVE1 HD300 01 GENLOCK OFF 630 SLAVE2 HD300 01 GENLOCK OFF 640 SLAVE3 HD100 01 650 SLAVE4 OFF GENLOCK OFF --COMMUNICATION STATUS-- DATA BIT 7bit PARITY BIT ODD STOP BIT 1bit BAUD RATE 9600bps COMM PORT SERIAL PORT ■ Connection with Digital Disk Recorder WJ-HD220 Series ● To Confirm the Images from a Recorder Connected to the Unit • Connection procedures are the same as WJ-HD200 Series. (Refer to the operating instructions of matrix switcher.) • Set the DATA setting to "PSD" for CAMERA 1 to 4 in the CAMERA SYSTEM SETUP menu of the recorder. ● To Control a Recorder via the Network • Connection procedures are the same as WJ-HD200 Series. • Set the DATA setting to "PSD" for CAMERA 1 to 4 in the CAMERA SYSTEM SETUP menu of the recorder. ● Settings of Administrator Console and SETUP MENU(OSD) Select "HD200" in the Administrator Console window. 40