Panasonic WVCU650 WJSX150 User Guide - Page 32

WJ-HD100 SERIES CONTROL MUX (TERMINAL MODE) Digital Disk Recorder WJ-HD100 Series are operable with the system controller, when the Multiplexer board is installed in the matrix switcher. Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and configure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and WJ-HD100 Series SETUP MENU. (Refer to the operating instructions of matrix switcher.) ■ Displaying WJ-HD100 Series SETUP MENU The operations are the same as WJ-HD500 Series. Refer to p. 18 Displaying WJ-HD500 Series SETUP MENU. The following functions and buttons are valid in SETUP MENU. 3D joystick to the left (A): Decrements a parameter 3D joystick to the right (B): Increments a parameter ■ Controlling Digital Disk Recorder WJ-HD100 Series The following are the operating procedures of WJ-HD100 Series via the system controller. ● Manual Recording The operations are the same as WJ-HD500 Series. Refer to p. 20. ● Stopping REC ONLY Alarm Recording The operations are the same as WJ-HD500 Series. Refer to p. 20. ● Search Playback You can search playback images using the ALARM RECALL table or the SEARCH table. Every time you press the SEARCH/T&D SEARCH button, the display will change as follows. Live image → Date-and-time entry form → ALARM RECALL table → Live image • Date-and-time Search Playback The recorded images can be searched for through the date and time. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the SEARCH/T&D SEARCH button. The date-and- time entry form will appear on the center of the monitor. ● Multiscreen Segment Switching The operating procedure is the same as WJ-HD500 Series. (Refer to p. 19.) Note: 7-, 10-, or 13-segment multiscreen display is unavailable. ● Normal Playback The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Notes: • You cannot skip to the previous/next record. • Refer to WJ-HD100 Series Operating Instructions for details and other playback modes. SEARCH YYYY/MM/DD HH:MM 2002/05/07 19:32 Note: The factory default setting is the current date and time. 32