Panasonic WVCU650 WJSX150 User Guide - Page 5

Program Preset Position, Call Preset Position, Cam03, Pre48, Memory, Pre05 - joystick

Get Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM PDF manuals and user guides
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

■ Program Preset Position 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2. To move the camera to the position to be preset, move the 3D joystick and press the lens control buttons. 3. To select the desired preset position number, press the numeric buttons. (1 to 64) 4. When you have selected a wrong number, press the CLEAR button to clear the numeric input. 5. Press the PRESET/PGM PRESET button while holding down the SHIFT button to save a preset position of the selected camera. Mon1 Cam03 Pre48 Memory Notes: • If the entered position number has stored the previous preset position, it will be overwritten by the new one. • SETUP MENU and WJ-SX150A Administrator Console can configure each operator's pan/tilt control. (Refer to the operating instructions of matrix switcher.) ■ Call Preset Position 1. Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.) 2. To select the desired preset position number, press the numeric buttons. (1 to 64) 3. When you have selected a wrong number, press the CLEAR button to clear the numeric input. 4. Press the PRESET/PGM PRESET button to move to the preset position of the selected camera on the active monitor. Mon1 Cam03 Pre05 Notes: • To use the above function, you must set the preset position number for the camera. • If you press no numeric buttons or the button 0 in Step 2, the camera will move to the home position. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
5
■
Program Preset Position
1. Select the desired monitor and camera. (Refer to p. 3
Monitor Selection and p. 3 Camera Selection.)
2. To move the camera to the position to be preset, move
the 3D joystick and press the lens control buttons.
3.
To select the desired preset position number, press the
numeric buttons. (1 to 64)
4. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
5. Press the PRESET/PGM PRESET button while holding
down the SHIFT button to save a preset position of the
selected camera.
Notes:
•
If the entered position number has stored the previ-
ous preset position, it will be overwritten by the new
one.
• SETUP MENU
and
WJ-SX150A
Administrator
Console can configure each operator's pan/tilt con-
trol. (Refer to the operating instructions of matrix
switcher.)
■
Call Preset Position
1. Select the desired monitor and camera. (Refer to p. 3
Monitor Selection and p. 3 Camera Selection.)
2.
To select the desired preset position number, press the
numeric buttons. (1 to 64)
3. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
4. Press the PRESET/PGM PRESET button to move to the
preset position of the selected camera on the active
monitor.
Notes:
• To use the above function, you must set the preset
position number for the camera.
• If you press no numeric buttons or the button 0 in
Step 2, the camera will move to the home position.
Mon1
Cam03
Pre48
Memory
Mon1
Cam03
Pre05