Panasonic WVCU650 WJSX150 User Guide - Page 19
Controlling Digital Disk, Recorder WJ-HD500 Series, Recorder Mode, Multiscreen Segment Switching
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
■ Controlling Digital Disk Recorder WJ-HD500 Series The following are the operating procedures of WJ-HD500 Series via system controller. Note: Refer to the operating instructions of Digital Disk Recorder WJ-HD500 Series for details. ● Recorder Mode Before operating the recorder, it is necessary to enter the recorder mode. 1. Select the desired monitor. (Refer to p. 3 Monitor Selection.) 2. To select a recorder, press the corresponding numeric button. Recorder Master recorder Slave 1 recorder Slave 2 recorder Slave 3 recorder Slave 4 recorder Numeric button 0 (You can skip pressing this button.) 1 2 3 4 3. Press the RECORDER/UNIT button. The system will enter the recorder mode. • The images from the recorder are displayed on the active monitor in multiscreen segments. • The camera number will disappear from the LCD. • The monitor number, recorder number, and "/ HD500" will appear on the LCD. Mon4 Cam-- R4 /HD500 4. To exit the recorder mode, select the camera. (Refer to p. 3 Camera Selection.) The monitor number and camera number will appear on the LCD again. You can also exit the recorder mode by pressing the RECORDER/UNIT button during the recorder mode. Note: Only one operator can enter the recorder mode. ● Multiscreen Segment Switching Multiscreen segment patterns are configurable through WJHD500 SETUP. (Refer to the recorder's operating instructions.) 1. Enter the recorder mode. (Refer to Recorder Mode.) 2. Press the MULTI SCREEN button. Every time you press the button, the multiscreen segment patterns are switched. (The following is the factory default setting.) 4A (Page 1 of the quad → Camera 1, 2, 3, and 4) → 4B (Page 2 - Camera 5, 6, 7 and 8) → 4C (Page 3 Camera 9, 10, 11 and 12) → 4D (Page 4 - Camera 13, 14, 15 and 16) → 7 (segments) → 9 →10 → 13 → 16 → 4A 3. To return to the spot display, exit the recorder mode. Note: Multiscreen segment patterns are not configurable through WJ-SX150A Administrator Console. ● Normal Playback 1. Enter the recorder mode. (Refer to Recorder Mode.) 2. To start the playback, press the PLAY/PAUSE button. The system will enter the playback mode. Then, the most recent recorded image will be played back. • To pause the playback, press the PAUSE button. • To stop the playback, press the STOP button. • To resume the playback, press the PLAY/PAUSE button. • To move forward/backward search during the playback, move the shuttle ring clockwise or counterclockwise. Shuttle ring clockwise: Fast-forward playback Shuttle ring counterclockwise: Rewind playback Shuttle hold button: If you press this button while rotating the shuttle ring, playback speed will be maintained even after removing a hand from the shuttle ring. (The LED indicator on this button blinks during the fast playback.) • To move forward/backward field advance during the pause, move the JogDial clockwise or counterclockwise. JogDial clockwise: Forward field advance JogDial counterclockwise: Backward field advance 19