Panasonic WVCU650 WJSX150 User Guide - Page 30

WJ-HD200 SERIES CONTROL (TERMINAL MODE) Matrix switcher can control the following functions of Digital Disk Recorder WJ-HD200 Series. The following is the procedure of WJ-HD200 Series SETUP MENU. Notes: • The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 36. • When a Multiplexer board is installed in the matrix switcher, you can neither connect nor control a WJ-HD200 Series recorder. You need to remove the board from the matrix switcher. ■ Displaying WJ-HD200 Series SETUP MENU The operations are the same as WJ-HD500 Series. (Refer to p. 18.) ■ Controlling Digital Disk Recorder WJ-HD200 Series The following are the operating procedures of WJ-HD200 Series via system controller. Note: Refer to the operating instructions of Digital Disk Recorder WJ-HD200 Series for details. ● Recorder Mode The operations are the same as WJ-HD500 Series. (Refer to p. 19.) ● Manual Recording The operations are the same as WJ-HD500 Series. (Refer to p. 20.) Note: Refer to WJ-HD200 Series Operating Instructions for details and other recording modes. ● Stopping REC ONLY Alarm Recording The operations are the same as WJ-HD500 Series. (Refer to p. 20.) ● Search Playback You can search playback images using the ALARM RECALL table or the SEARCH table. Every time you press the SEARCH/T&D SEARCH button, the display will change as follows. Live image → Date-and-time entry form → ALARM RECALL table → Live image • Date-and-time Search Playback The recorded images can be searched for through the date and time. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the SEARCH/T&D SEARCH button. The date-andtime entry form will appear on the center of the monitor. ● Multiscreen Segment Switching The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: 4C-, 4D-, 7-, 10-, 13- and 16-segment multiscreen display patterns are unavailable. SEARCH YYYY/MM/DD HH:MM 2002/05/07 19:32 ● Normal Playback The operations are the same as WJ-HD500 Series. (Refer to p. 19.) Note: You cannot skip to the previous/next record. Note: The factory default setting is the current date and time. 30