Panasonic WVCU650 WJSX150 User Guide - Page 29

Note: To cancel the setting and exit "HD300 A - B repeat", press the MON (ESC) or EXIT button. The LCD display will return to the default status. 3. During playback, press the F1 button at the point you wish to start playback. The playback start point (A) will be set. Note: To cancel the start point, press the F4 button. 4. Press the F2 button at the point you wish to end playback. The playback end point (B) will be set, and the repeat playback will be performed between (A) and (B). ■ Canceling Filters During the filtering playback, the searching filter will be temporarily canceled or recovered. Notes: • This function is available only during filtering playback. • You can change the ON/OFF setting during playback and playback pause. 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MENU button repeatedly until "HD300 Listed" appears on the LCD. Note: If the recorder is WJ-HD300 Series, "B" mark will light up beside "Off" in the default status. HD300 Listed 304 On Off 3. Press the F2 button. The searching filter will be canceled, and "B" mark will light up beside "Off". HD300 Listed 304 On Off Notes: • To recover the searching filter, press the F1 button. The searching filter will be recovered, and "B" mark will light up beside "On". • To cancel the setting and exit "HD300 Listed", press the MON (ESC) or EXIT button. The LCD display will return to the default status. ■ Electronic Zooming (EL-ZOOM) The operations are the same as WJ-HD500 Series. (Refer to p. 21.) Note: 2 x and 4 x are available zooming range. 8 x is unavailable. ■ System Function 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the CAM FUNC/SYS FUNC button while holding down the SHIFT button. The system function of recorder will be executed. Notes: • Refer to the operating instructions of recorder for details on available functions and function numbers. • If you have entered a wrong function number (other than 1 to 999), "Prohibited" will appear on the LCD for three seconds. Then, the LCD will return to the former status. ■ Playing the Latest Recorded Image 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the GO TO LAST button during the playback. The latest recorded image will be played back. ■ Marking 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. Press the MARK button during the playback. The playback start point will be marked. Note: The marked playback images will be listed in the marking list window. Refer to p. 27 Marking search for how to play back. ■ Displaying Camera Titles 1. Enter the recorder mode. (Refer to p. 19 Recorder Mode.) 2. When you press the OSD button, the OSD display will change. Note: Refer to the recorder's operating instructions for details on operations. 29