Pfaff Tiptronic 2020 Owner's Manual - Page 12
cPkcF
View all Pfaff Tiptronic 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
P' FAFF 2020 (.4 PFAFF 2f7,'D Winding the bobbin from the spool pin 7,7 z. 1 cPkcF 20. Place the sewing thread on the spool holder. To obtain free movement of the thread and hold the thread spool firmly, fit an unwinding disk of the right size for the thread spool. Threading Place the thread into guide A from the front and pull it through thread take-up B from the rear right to the front left. Pull the thread under the thread guide C (from back to front). Wind the start of the thread round the bobbin several times in a clockwise direction. Switch-on the master switch Hold the end of the thread firmly and press the foot contra. As soon as the bobbin is full, the winding action will be stopped automatically. Push the bobbin to the !eft, cut the thread and remove bobbin from winder. >rAWAfa;lf#MMIMT.W5V-WM. Winding from the second spool holder Insert the second spool holder in the hole provided. Threading Threading of the thread is carried out as in the case of the spool holder on page 18. Switch on the master switch Hold the end of the thread firmly and press the foot control. As soon as the bobbin is full, the winding action will be stopped automatically. Cut the thread, push the bobbin to the left and remove bobbin from winder. 19