Pfaff Tiptronic 2020 Owner's Manual - Page 29
o109.
View all Pfaff Tiptronic 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Tlr s \, v • Precl• VW S-2 -11..- (I 14 6.0 1.0 . 3-5 0 2010 prof,. NAeN 5 11 . 2020 11 7010 • 0 3/ _ 7.9 0 Fancy elastic stitch The fancy elastic stitch is very useful for fabrics that require a flat seam, i.e. terry :loth. • Overlap the two fabric edges about 3/4 of an inch (2 cm) and overstitch each edge with the fancy elastic stitch. Quilting stitch In traditional quilting three layers (2 fabric and 1 batting) are joined together with small hand stitches to create beautiful family heirlooms. The sewing machine makes accomplishing this technique much easier and fasterl The tiptronic 2020 and 2010 enable you to achieve a wonderful hand-quilted look by machine, i.e. with program 11. This stitch works equally well for topstitching on jackets and overcoats. Combining the quiltstitch with other decorative stitch programs can create unique new patterns. pr)Q. 2070 4 2010 A VS. 4 V 6.0 < > ..W.,_ dhayk, (11 • 0.2-1 3-5 - .--- C73 ..n- 0 • o109. AIV x• J1- 2020 • 4 6.0 0.2-1 - 35 0 2010 . Darning with the elastic stitch The elastic stitch is very suitable for repairing holes, tears and damaged areas. If the area is only slightly damaged, you may sew over it with rows of stitches until it is well covered. No additional backing is needed for these slightly damaged areas. Whon doing so, make sure the stitch rows overlap each other. For tears, frayed edges or small holes it is advisable to place a piece of fabric, slightly larger than the damaged area and of the same color, on the wrong side of the fabric. This strengthens the fabric and ensures a much stronger, longer-lasting darn. Overstitch the damaged area as described above and cut away the excess material close to the stitching on the back side of your work. Sewing-on patches The best way to darn/repair larger holes is to patch, by covering the damaged area with a piece of new fabric of a matching color. Cut a piece of fabric slightly larger than the damaged area or hole. - Strengthen the wrong side of the patch with iron-on stabilizer. - Baste the new piece of material over me damaged area. - Overstitch the fabric edges with the elastic stitch. - Cut back the damaged fabric on the reverse side close to the seam. .2 53