Pfaff Tiptronic 2020 Owner's Manual - Page 34

Keyhole buttonhole with gimp thread Place the center of a length of gimp thread over the metal bar extending from the center, front of the buttonhole foot. Pass the thread ends under the foot and pull up into the right and left guides on the clamp at the back of the sewing foot. Guide the g.rnp thread along the foot at the side. Push the runner of the buttonhole foot forward to the second marking. Sew the right seam of the buttonhole. 4.4 After the machine sews the first few stitches of the curved end draw the thread down from the clamp with a straight pin. Warning: The sewing foot must not be raised from the fabric surface. Pull the gimp thread on the left towards the rear until the loop is just in front of the needle. Carefully sew the curve. After sewing the curve, hold the gimp thread a little more taut and finish sewing the buttonhole. Cut off the excess gimp thread. 32 I r Decorative and traditional embroidery techniques General notes on embroidery Combined Borders Embroidery with the twin needle Monograms Embroidery with a satin stitch Zigzag / tapering Decorative buttonhole Satin stitch mitered corners Appliqué Richelieu Patchwork quilt Eyelet embroidery/cross-stitch Hemstitching page 64 page 65 - 66 page 66 page 67 page 68 69 page 70 page 70 page 71 page 71 page 72 page 73 page 74 63