Ricoh Priport HQ9000 Operating Instructions - Page 103
Closed area method
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Printing Functions ❒ The line marking the designated area should be more than 2mm, 0.08", from any neighboring image. a b c 3 GRCOMM2E a, b, c = 2mm, 0.08" Closed area method Note ❒ The line designating the area must be a closed loop. A Put the command sheet on top of the original. ZM-20 B Using a black, red, or blue felt tip pen, draw a line around the area to des- ignate. The line should have a thickness of at least 1mm. ZM-26 Note ❒ Make sure there is no break in the line. ❒ Draw the line at least 2mm, 0.08", away from the image so that the whole image can be recognized. 91
Printing Functions
91
3
❒
The line marking the designated area should be more than 2mm, 0.08",
from any neighboring image.
a, b, c = 2mm, 0.08"
Closed area method
Note
❒
The line designating the area must be a closed loop.
A
Put the command sheet on top of the original.
B
Using a black, red, or blue felt tip pen, draw a line around the area to des-
ignate. The line should have a thickness of at least 1mm.
Note
❒
Make sure there is no break in the line.
❒
Draw the line at least 2mm, 0.08", away from the image so that the whole
image can be recognized.
c
a
b
GRCOMM2E
ZM-20
ZM-26