Ricoh Priport HQ9000 Operating Instructions - Page 131
Troubleshooting
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
4. Troubleshooting If Your Machine Does Not Operate as You Want The following chart gives explanations of common problems and messages. If other messages appear, follow the instructions displayed. If a malfunction or a misfeed occurs, the following messages will appear on the display. Note ❒ For "Troubleshooting" about printing from a computer, refer to the other manuals for this machine. ❖ When a Message is Displayed Message Check the paper size and paper direction. #### and paper size mismatch. Set original. Maximum quantity: #### Minimum quantity: #### Drum Unit is not set correctly. Causes Solutions The paper is not placed in the Place the original in the same disame direction as the original. rection as the paper. If you press the {Start} key, the selected paper will be used for printing. The paper you loaded does not Set a paper size that matches the match with the reproduction ra- reproduction ratio you have se- tio you selected. lected and your original. The reproduction ratio selected by Auto Magnification mode is too big or too small. Note ❒ You can make prints if you press the {Start} key. You have not changed the origi- Place the next original on the exnal on the exposure glass before posure glass or in the ADF. pressing the {Start} key. Original is not placed. Place your originals. The number of prints exceeds the maximum print quantity. You can change the maximum number of prints that can be made in one operation with User Tools. See p.163 "Maximum Print Quantity". The number of prints does not exceed the minimum print quantity. You can change the minimum number of prints that can be made in one operation with User Tools. See p.163 "Minimum Print Quantity". Slide in the drum until it clicks. - Make sure that the drum is com- pletely set in position. 119