Ricoh Priport HQ9000 Operating Instructions - Page 51
Printing on Paper Smaller than B6 JIS, Printing on 81.4 g/m, 6 lb. or Heavier, Paper
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Printing Preparations C Loosen the screw for the end plate, adjust it to the paper size, and then tighten the screw to lock the end plate. B Loosen the screw for the end plate, move it as close to the machine as possible, and then tighten the screw to lock the end plate. 2 ABQ020S Note ❒ Align the screw with the appro- priate paper size mark. Printing on Paper Smaller than B6 JIS A Move the side guides outward. AJK163S Printing on 81.4 g/m2 (21.6 lb.) or Heavier Paper A Lower the paper alignment wings. ABQ023S Note AJK162S ❒ Depending on the type of paper that you are using, you might not be able to use the full capac- ity (3000 sheets) of the LCOT when the wings are lifted. ❒ Lift the paper alignment wings when B5 JISKL or A4K prints are delivered curled up. 39