Ricoh Priport HQ9000 Operating Instructions - Page 136

Troubleshooting If You Cannot Make Prints as You Want Problem Causes Solutions Misfeeds occur frequently. Improper paper type is select- Select proper paper type. See ed. p.49 "Printing onto Various Kinds of Paper". When you try to set several functions at a time, you cannot set some functions. Some functions cannot be used together. See p.117 "Combination Chart". Parts of the image are not Erase margin is too wide. Set a narrower erase margin printed in Erase border mode. Edge margins of original are too narrow. with User Tools. See p.78 "Erase Border". 4 Prints are blank or parts of the The paper feed side plates are Make sure that the paper feed image are not printed. not set correctly. side plates touch the paper lightly and the proper paper size is displayed in the display. 2nd printing with another drum is unsatisfactory. The 1st print image is still wet. Wait until the 1st image becomes dry. An uneven solid image appears. Large solid image wrinkles the master. Increase the print speed or select photo mode. "Double feed detected at out- The reverse or the face of Set to "OFF" in "Double Feed put. Check the output." is dis- printed paper is printed again. Warning" with User Tools. played frequently. Combine Problem Causes Prints are blank or parts of the Original size and orientation image are not printed. are not correct. Print image is not correct. Original set order is not correct. Solutions You cannot use originals of different sizes and orientation in Combine function. Use originals of same size and orientation. Place originals face up in the optional ADF. The first original should be on top. Place original face down on the exposure glass. The first original should be set first. 124