Ricoh Priport HQ9000 Operating Instructions - Page 158

Troubleshooting kRemoving the Used Master When k lights, it is time to empty the master eject unit. It also lights when the master eject unit is not set properly. F Remove the used master by push- ing down the handle (1) towards the waste container (2). Note ❒ Ink is easily removed from skin by waterless hand cleaners followed by washing with soap and water. ❒ Be careful not to get any ink on your clothing while emptying the 4 master eject unit. Note ❒ When Higher Security is on, you ❒ If you cannot remove the used have to enter the security code to unlock the master eject unit. master completely, repeat step F until all the master is re- A Prepare a container for the used master. moved. G Reinstall the master eject unit, B Open the front door. making sure it clicks into position. C Use handle (E1) to pull out the master eject unit until it stops. H Close the front cover. D Pull up handle (E2) and pull out the master eject unit completely. E Hold the master eject unit upper handle and turn it clockwise with one hand while holding handle (E1) with other hand (1). 146