Ricoh Priport HQ9000 Operating Instructions - Page 148

Troubleshooting D Remove the misfed paper from the inside as shown in the illustration. E If you cannot remove the misfed paper, remove paper from the pressure cylinder. 4 F Set the drum unit and close the front door. *: Less than 6 mm, 0.24" Note ❒ For setting the drum unit, see p.112 "Changing the Color Drum Unit". "x + C" Paper Misfeeds in the Paper Exit Section A Slowly, but firmly pull out the misfed paper. -To prevent paper misfeeds: If the paper is curled or the original's leading edge margin is too narrow, the following action is necessary. • When you use curled paper, correct as shown. GRCURL0E • When the leading edge margin of the original is less than 6 mm, 0.24" or there is a solid image on the leading edge, insert the original with the widest margin first or make a leading edge margin by making a print. 136 -To prevent paper misfeeds: When thin paper misfeeds in the paper exit section, reduce the printing speed with the {W}{V} of speed setting keys. See p.57 "Changing the Printing Speed". If you cannot reduce the printing speed, close the trailing edge guides or move the end plate toward the paper delivery tray edge.