Ricoh Priport HQ9000 Operating Instructions - Page 159
When Multiple Sheets Are Fed at the Same
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
When Multiple Sheets Are Fed at the Same Time When Multiple Sheets Are Fed at the Same Time Follow the procedure below to correct a multiple sheet feed problem of the LCIT. A Adjust the feeding pressure lever of the LCIT according to the thickness of the paper loaded. ABQ025S Note ❒ The appropriate feeding pressure lever positions according to the weight of the paper are as follows. Thick Standard Thin Metric version Inch version 127.9-209.3 34.0 - 55.6 g/m2 lb. 52.3 - 127.9 13.9 - 34.0 g/m2 lb. 47.1 - 52.3 12.5 - 13.9 g/m2 lb. ❒ If multiple sheets of paper are fed at the same time when the feeding pressure lever is set to Standard, set the feeding pressure lever to Thin. ❒ If paper is not fed at all when the feeding pressure lever is set to Thin, set the feeding pressure lever to Standard. ❒ Paper heavier than 127.9 - 209.3 g/m2 (34.0 - 55.6 lb.) is catego- rized as thick paper. However, for B5 JIS paper heavier than 127.9 g/m2 (34.0 lb.), set the feeding pressure lever to Stan- dard. ❒ When paper is still not fed prop- erly even after the feeding pres- sure lever is adjusted, increase 4 the paper feeding pressure of the machine. B If the problem still persists, take the paper out and fan it before loading it again. TPEY080J 147