Ricoh Priport HQ9000 Operating Instructions - Page 168

User Tools Mode Setting ❖ Energy Saver Option You can select to [Energy Saving] or [Auto Off]. Note ❒ Default: Energy Saving ❖ Auto Quality Start Setting You can select [On] to have the machine automatically carry out a few idle spins when the power is turned on. When selecting [Off], you can restore the density by making a few extra prints or by using the Manual Quality Start mode. ❖ Auto Cycle Note Specifies whether Auto Cycle mode is selected at power on. ❒ Default: On Note ❒ Default: On ❖ No.of ldling Rotations: Auto Quality Start You can select how many times the ❖ Ignore Paper Size 5 If you are making prints on custom size paper and the original image drum unit idles after the displayed time periods have passed in Auto Quality Start mode. does not entirely appear on the print, select "Ignore". The machine will not detect the paper length. Note ❒ Default settings are follows. Note Time period ❒ Default: Do not Ignore ❖ Longer Paper You can select "Use" to allow the use of paper longer than 432 mm, 17.0". Note ❒ Default: Do not Use ❖ Skip Feed You can select [Display] or [Do not Display] and set the number of Skip Feed. Note ❒ Default: 2 times ❒ The time can be set from 2 to 9 times. Low Tmp. *1 Normal Tmp. *2 High Tmp. *3 0777 0555 0555 *1 (Below 19°C or 66.2°F) *2 (19 - 29°C, 66.2 - 84.2°F) *3 (Over 29°C or 84.2°F) ❒ To increase the print image density, increase the number of drum rotations, and vice versa. Temperature 0 - 4 hours 4 - 24 hours 24 - 72 hours Over than 72 hours 156