Ricoh Priport HQ9000 Operating Instructions - Page 49
Plug the LCIT optical cable into
View all Ricoh Priport HQ9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Printing Preparations D Hold the handle and unfold the intermediate feeding section of the LCIT. G Plug the LCIT optical cable into the slot located at the left side of the back of the machine. 2 ABQ004S Note ❒ Do not release the handle. E Lift the end of the intermediate feeding section and put it down placing the wheeled support bar onto the paper feed tray. ACY066S Turning On the Power Important ❒ Make sure to turn on the power switch of the LCS first, and then turn on the main switch of the machine. A Make sure that the power cord is firmly plugged into the wall outlet. B Turn the power switch on. The green indicator blinks. AJK157S F Push the LCIT into the machine until it clicks. ABQ011S ABQ006S 37
Printing Preparations
37
2
D
Hold the handle and unfold the
intermediate feeding section of
the LCIT.
Note
❒
Do not release the handle.
E
Lift the end of the intermediate
feeding section and put it down
placing the wheeled support bar
onto the paper feed tray.
F
Push the LCIT into the machine
until it clicks.
G
Plug the LCIT optical cable into
the slot located at the left side of
the back of the machine.
Turning On the Power
Important
❒
Make sure to turn on the power
switch of the LCS first, and then
turn on the main switch of the ma-
chine.
A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B
Turn the power switch on.
The green indicator blinks.
ABQ004S
AJK157S
ABQ006S
ACY066S
ABQ011S