Ricoh Priport HQ9000 Operating Instructions - Page 132

Troubleshooting Message Causes Solutions Communication error has occurred. Turn the operation switch off then on. Turn the operation switch off and on. - If the message appears again, contact your service representa- tive. Print image is The master image previously Make prints after pressing [Exit] larger than the printed is larger than the paper. and selecting the paper size selected paper The image exceeds the paper size. Change pa- size. per size. again. Note ❒ If you press [Exit] to erase the message and press the {Start} key, the machine starts to 4 make the prints. However, the image might not fit on the paper. -When a service call message is shown on the display panel Press [Exit]. Then turn the main switch off and back on again. If a service code appears again, contact your service representative. Note ❒ If a service code appears on the display panel after you turn the main switch off and on a few times, do not continue turning it on and off. Leave the machine off. ❒ When you make masters continuously using originals with solid images, "SC203" tends to appear on the display panel. In this case, turn off the main switch and wait for a while. Then turn on the main switch. 120